Ariane 5 ES

...
Ariane 5 ES GalileoAccess the image

Main data  Ariane 5 ES Galileo
 Height  up to 50 m
 Diameter  up to 5.4 m
 Liftoff mass  760 t
 Payload mass (including dispenser)  3400 kg (2950 kg + 450 kg for dispenser)

The Ariane 5 ES (Evolution Storable) is derived from the generic Ariane 5 but uses a more powerful lower composite and a small upgraded storable propellant stage, allowing reignition and long coast phases.

This reignition capability enables the injection of a cluster of Galileo satellites into their operational orbit.

After releasing its payload, a final burn allows the empty upper stage to deorbit and burn up in the Earth’s atmosphere or move into another safe ‘graveyard orbit’.

Ariane 5 ES missions

The maiden flight of the Ariane 5 ES took place on 9 March 2008 with the first Automated Transfer Vehicle (ATV) mission, Jules Verne.

This was followed by four more: Johannes Kepler on 16 February, 2011; Edoardo Amaldi in 2012; Albert Einstein in 2013; and Georges Lemaître in 2014. Each ATV weighed more than 20 tonnes and carried supplies to the International Space Station.

On 17 November 2016, the Ariane 5 ES Galileo was used to accelerate the deployment of Europe’s new satellite navigation system, Galileo.

In development since 2012, this new Ariane variant has evolved from the version used to place ESA’s 20 t ATV supply vehicle into low orbit.

The new launcher has to carry a lighter payload (about three tonnes) but needs to take it up to the much higher altitude of 23 522 km.

...
Four Galileos on Ariane 5Access the image

The dispenser built for Galileo missions has a double role. Firstly it must hold the quartet of satellites securely in place during the loads induced by the liftoff, and then the nearly four-hour long flight to medium-Earth orbit.

Then, once the Ariane 5 EPS upper stage reaches its target altitude, the dispenser has to release the four Galileo satellites smoothly in pairs with a 20-minutes interval using a pyrotechnic release system triggered by separate igniters, each one firing half a second after the other.

While the four Galileos manoeuvre themselves down to their final set height, Ariane’s upper stage is left in a stable ‘graveyard orbit’ which is not interfering with the Galileo operational orbit.

Ariane 5 ES elements

The Ariane 5 ES has three parts:

  • The launcher upper part comprises:
    • Fairing (long version for ATV and medium version for Galileo);
    • Launch vehicle payload adaptor accommodating one heavy payload or a dispenser with multiple satellites.

 

  • The upper composite comprises:
    • Storable propellant stage (EPS) containing 10 t of propellant (MMH: monomethyl hydrazine and N2O4: dinitrogen tetroxide) with the Aestus engine providing 2.7 t of thrust;
    • The Vehicle Equipment Bay (VEB), ‘the brain’, providing autonomous control of all the systems during all mission phases;

 

  • The lower composite is identical to the one used on Ariane 5 ECA.

 

The Ariane 5 ES Galileo is derived from the Ariane 5 ES. The main differences are:

  • the mission reaches medium-Earth orbit for Galileo;
  • the medium fairing size;
  • a dispenser developed for Galileo carrying four satellites;
  • a new lighter Vehicle Equipment Bay (VEB) structure improving launcher performance;
  • the EPS tank loading (full for Galileo; half filled for ATV)
  • thermal and electrical adaptations of equipments in order to comply  with long ballistic phase at high altitude (more than four hours in total compared to ATV which is about one hour) and with the specific upper part.
...
Ariane 5 ES launch sequence (Galileo mission in MEO)Access the image
...
Ariane 5 ES Galileo orbital transferAccess the image

Rate this

  • Currently 4.5 out of 5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
Rating: 4.3/5 (29 votes cast)

Thank you for rating!

You have already rated this page, you can only rate it once!

Your rating has been changed, thanks for rating!

Views

17023